Schwinn IC Pro Instrukcja Użytkownika

Schwinn IC PRO Bike Owners Preventative Maintenance Guide Schwinnequipment.com

Check crank arm bolts are tight using an 8mm Allen key. To tighten, turn bolts clockwise on both sides. . ACTIVITY 8 - Monthly

Remove both Brake pads by adjusting the tension knob to the least resistance and remove the bolt, spring and two washers using a 4mm Allen wrench

Slide brake pad out by applying lateral pressure on the brake assembly. Please note the brake pads with the 4mm bolt fitting are

ACTIVITY 11 - Monthly Clean existing or replace worn/damaged brake pads. Before replacing spray a generous amount of Schwinn Silicone or other silico

ACTIVITY 12 - Monthly Teflon based lubricant IMPORTANT NOTE: DO NOT REMOVE THE CHAIN GUARD. IT IS NOT SAFE AND NOT REQUIRED TO LUBRICATE Lubricate th

ACTIVITY 13 - Quarterly Remove either the left or right shroud using a Philips screwdriver and lubricate the tension knob thread with a multipurpose g

Preventative Maintenance is compulsory for a warranty claim. The performance and longevity of Schwinn indoor cycles relies on a thorough preventati

Schwinn IC PRO. Bikes – Owners Preventative Maintenance Guide V3 / 2013

Schwinn IC PRO Owner’s Maintenance Guide Recommended maintenance Daily Weekly Monthly Quarterly Release the brake knob at the end of each class.

Adjust resistance knob to the least resistance at the end of each workout. ACTIVITY 1 - Daily

Remove handlebar post, clean sleeve and leave beside bike overnight to allow handlebar sleeve to dry. ACTIVITY 2 - Daily IMPORTANT NOTE: Neve

Spray some Schwinn Silicone or other silicone-based spray onto a clean cloth and clean the bike; this will preserve the condition of the bike.

Check the pedal threads are tight using a 15mm open-ended wrench; tighten the left pedal by turning anti-clockwise and tighten the right ped

Clean and lubricate all pop pin threads with Schwinn Silicone or other silicone-based Spray. . ACTIVITY 5 - Weekly

Spray some Schwinn Silicone or other silicone-based spray onto a clean cloth and turn flywheel until the rim is clean and lubricated. ACTIVIT

ACTIVITY 7 - Weekly Remove seat and handlebar posts (seat post shown) and lubricate with Schwinn Silicone or other silicone-based spray. IMPORTANT